University of Cambridge > Talks.cam > Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Department of Engineering, Production Processes Group Seminars, Institute for Manufacturing

Add to your list(s) Send you e-mail reminders Further detail
Subscribe using ical/vcal (Help)

Members of the Production Processes Group carry out research into manufacturing processes at the component level, with an emphasis on understanding and applying the underlying science. Topics include the development of better models for traditional processes, as well as of innovative processes based on emerging technologies. Throughout, there is a strong emphasis on the commercial priorities and on the transfer of technology to industry.

Tell a friend about this list:

If you have a question about this list, please contact: ac867; Sinead Parker; alison martin. If you have a question about a specific talk, click on that talk to find its organiser.

1 upcoming talk and 100 talks in the archive.

The HiWi project: Manufacture of nano-composite permanent magnets for automotive traction

PLEASE NOTE DATE CHANGE FOR THIS TALK

UserAndrew Cockburn & David Hopkinson, Institute for Manufacturing, 17 Charles Babbage Road.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 14 December 2012, 11:30-12:30

Inkjet-based manufacturing printable organic lasers

PLEASE NOTE THE TIME FOR THIS TALK

UserDr Wen-Kai (Kai) Hsiao, Institute for Manufacturing, 17 Charles Babbage Road.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 16 November 2012, 11:00-12:00

Regimes of polymer behaviour in DoD ink-jetting

UserDr Steve Hoath, Institute for Manufacturing.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 19 October 2012, 11:30-12:30

Surfi-Sculpt: gravity defying melt flow

UserCaroline Earl, Institute for Manufacturing.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 08 June 2012, 11:30-12:30

The breakup of liquid filaments

UserAlfonso Castrejon Pita, Institute for Manufacturing, 17 Charles Babbage Road.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 25 May 2012, 11:30-12:30

Biopolymers: not the solution... yet or ever?

UserClaire Barlow & Madeleine Yates, Institute for Manufacturing, 17 Charles Babbage Road.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 04 May 2012, 11:30-12:30

Understanding atmospheric dynamics in the laboratory

UserAlfonso Castrejon Pita, Institute for Manufacturing.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 24 February 2012, 11:30-12:30

Understanding the Wind Energy Industry

UserJim Platts, Institute for Manufacturing.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 27 January 2012, 11:30-12:30

Research Activities for the EPSRC Centre for Ultra Precision Technologies

UserDr Bill O'Neill, Centre for Industrial Photonics, Institute for Manufacturing.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 02 December 2011, 11:30-12:30

Supersonic Laser Deposition of materials

UserDr Rocco Lupoi, Centre for Industrial Photonics, Institute for Manufacturing.

HouseCHANGE OF VENUE AND DATE: Seminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 18 November 2011, 11:30-12:30

Ordered polymer microstructures through templating water droplet rafts

UserDr Ronan Daly, Inkjet Research Centre, Institute for Manufacturing.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 14 October 2011, 11:30-12:30

Implications of Fukushima for future design and manufacture of nuclear power plant

UserTony Roulstone, Course Director, MPhil Nuclear Energy, Cambridge University Engineering Department..

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 03 June 2011, 11:30-12:30

Ink drop coalescence and imbibition: dynamics and impacts on printing quality

UserDr Kai Hsiao, Inkjet Research Centre, Institute for Manufacturing.

HouseSeminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 13 May 2011, 11:30-12:30

Plastic packaging: a lifecycle view

UserDr Claire Barlow, Institute for Manufacturng.

HouseSeminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 18 March 2011, 11:30-12:30

Impact and coalescence of ink-jet drops

UserElly S Betton, Inkjet Research Centre.

HouseSeminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 25 February 2011, 11:30-12:30

"Can Ipods grow on trees?"

UserChris Forman, Centre for Industiral Photonics.

HouseSeminar Room 1 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 21 January 2011, 11:30-12:30

Holographic visualisation of inkjet drops

UserGraham Martin, Institute for Manufacturing.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 10 December 2010, 11:30-12:30

Using Brazilian Bamboo

UserEduardo Acha, Departmental Columbian Visitor from Brazil.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 19 November 2010, 11:30-12:30

Nanoscale patterning of HOPG surfaces

UserSina Habibi, Institute for Manufacturing.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 22 October 2010, 11:30-12:30

Resource criticality

UserClaire Barlow (University of Cambridge).

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 28 May 2010, 11:30-12:30

Inkjet fluid Motion

UserSteve Hoath Inkjet Research Centre, Institute for Manufacturing.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 07 May 2010, 11:30-12:30

Conceptual Models for Dynamic Systems

UserDavid.G. Delamore, Institute for Manufacturing, Department of Engineering.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 19 March 2010, 11:30-12:30

Water and Sustainability - An Industrial Perspective

UserGeoff Townsend (Technical Director, Nalco Ltd).

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 19 February 2010, 11:30-12:30

Liquid fishbone - Atomization patterns produced by the oblique collision of two liquid jets

UserSung June Jung, Institute for Manufacturing, Department of Engineering.

HouseSeminar Room 3 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 29 January 2010, 11:30-12:30

HEGAC: Higher efficiency gas assisted laser cutting

UserDr Ali Khan, Centre for Industrial Photonics.

HouseSeminar Room 2 at the Institute for Manufacturing, 17 Charles Babbage Road.

ClockFriday 09 October 2009, 11:30-12:30

Recycling Multilayer Films

UserDai Morgan, Institute for Manufacturing.

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 22 May 2009, 11:30-12:30

Laser assisted Cold Spray

UserAndrew Cockburn, Institute for Manufacturing.

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 20 March 2009, 11:30-12:30

Manufacturing by droplet deposition

UserKai Hsiao, Institute for Manufacturing.

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 13 February 2009, 11:30-12:30

Performance and modelling of the oscillating piston flowmeter

UserCharlotte E Morton, Institute for Manufacturing.

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 23 January 2009, 11:30-12:30

Deformation of Coated Materials

UserDr Jyhwen Wang, Institute for Manufacturing.

HouseSeminar Room A at the Institute for Manufacturing, Mill Lane.

ClockFriday 28 November 2008, 11:00-12:00

Design, development and operation of novel ion traps

UserDr Jose Rafael Castrejon-Pita, Institute for Manufacturing.

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 06 June 2008, 11:30-12:30

Caribbean Steel Drums

UserSoren Maloney, Institute for Manufacturing.

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 23 May 2008, 11:30-12:30

Engineering fundamentals of energy efficiency

UserJonathan Cullen (Department of Engineering).

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 14 March 2008, 11:30-12:30

The Mechanics of Incremental Sheet Forming

UserKathryn Jackson - (Department of Engineering).

HouseSeminar Room B at the Institute for Manufacturing, Mill Lane.

ClockFriday 15 February 2008, 11:30-12:30

Please see above for contact details for this list.

 

© 2006-2019 Talks.cam, University of Cambridge. Contact Us | Help and Documentation | Privacy and Publicity